DS-A
Ceiling anchors
Fixed, plate, multi-outlet and swivel. The swivel anchor corrects small setting-out offsets: the cable always leaves straight towards the panel.
DS-AR
When the ceiling point is not directly above the panel.
On site the anchor is rarely exactly above the panel: a beam, a service run or a misplaced hole. With a fixed anchor the cable kinks at the outlet, rubs and the gripper is loaded off-axis. The swivel anchor turns with the cable and lets it leave straight.
- Corrects setting-out offsets without re-drilling.
- The cable does not kink or rub at the anchor outlet.
- Ideal with 3- and 4-leg kits, where each cable leaves at its own angle.
Several outlets from a single point
The three-outlet anchor and the four-leg gripper share an island's load from a single hole in the ceiling.
Fixed and plate anchors
Have a project?
We help you choose the system and send data sheets, quantities and price.