DS-X
2-, 3- and 4-leg kits
One ceiling point, several cables to the panel. For large islands and ceilings where anchors must be kept to a minimum.
Kits
Multi-leg
One point in the ceiling, several lines in the air.
Fewer holes in the ceiling and a clean geometry: multi-outlet anchors and grippers share the load between 2, 3 or 4 cables.
Size my project →Installation
1Feed the cable through the gripper in the direction of the arrow.
2Slide to the required height: it locks automatically.
3To lower or remove, press the plunger and adjust.
Inclined cables.
When the cable does not hang vertically, each cable carries less: the working load is multiplied by the cosine of the angle α. At 45°, 71% remains; at 60°, half. This applies to every 2-, 3- and 4-leg kit.
| α | Ø1.2 mm | Ø1.5 mm | Ø2.0 mm |
|---|---|---|---|
| 0° | 14 kg | 21 kg | 37 kg |
| 15° | 13 kg | 20 kg | 35 kg |
| 30° | 12 kg | 18 kg | 32 kg |
| 45° | 9 kg | 14 kg | 26 kg |
| 60° | 7 kg | 10 kg | 18 kg |
Rule H ≥ D: the vertical drop must be equal to or greater than the horizontal distance between the anchor and the panel point. The angle then stays within 45°. Never more than 60°.
System components
Have a project?
We help you choose the system and send data sheets, quantities and price.